Agricultural sprinkler pipes SPRIKLER PIPES & SYSTEM (ISI)
Agricultural sprinkler pipes are used to convey water under pressure from a pump or water source to sprinkler heads in open fields or greenhouses for irrigation.
| Component | Specification |
|---|---|
| Main Pipe | HDPE 63 mm to 110 mm |
| Working Pressure | 2.5 to 3.2 kg/cm² |
| Sprinkler Clamp | M.S Clamp / S.S clamp / K.P. Clamp |
| Standard Approvals | ISI 17425:2020 |
| CM/L NO. | 7600164815 |
Accessories
- M.S Clamp / S.S clamp / K.P. Clamp
- Risers pipe
- Sprinkler Nozzles (Brass / Plastic)
- Rain Gun
- Foot batten with clamp & Rubber Ring
- End Caps / Tee / Band
- PCN With Male & Female
Advantages of Using Sprinkler Irrigation
- Water savings up to 30–50%
- Uniform water distribution
- Suitable for undulating terrain
- Supports fertigation and pesticide spraying
- Increases yield and quality
- 3Yrs. Guarantee
Nozzles Flow
- Rain Gun Throw Round 100. Feet
- Brass Nozzles Throw Round 20. Feet
- Plastic Nozzles Throw Round 20. Feet
- 8 to 10 sprinkler nozzles on a 5HP motor (So. you can fit)
- 14 to 16 sprinkler nozzles on a 7.5HP motor(So. you can fit)
ChartThickness & Weight Chart As per IS 17425 : 2020
|
IS 17425 : 2020 |
Class – 1 | Class – 2 | |||||||
| 0.25 Mpa | 0.32 Mpa | ||||||||
| 2.5 Kgs/Cm² | 3.2 Kgs/Cm² | ||||||||
| Nominal OD | Mean Outside Diameter | Maxi. Ovality | Min. | Max. | Weight | Min. | Max. | Weight | |
| Min. | Max. | ||||||||
| 63 | 63.00 | 63.60 | 1.50 | 2.00 | 2.40 | 0.399 | |||
| 75 | 75.00 | 75.70 | 1.60 | 2.00 | 2.40 | 0.478 | 2.50 | 2.90 | 0.582 |
| 90 | 90.00 | 90.80 | 1.80 | 2.20 | 2.60 | 0.627 | 2.90 | 3.40 | 0.816 |
| 110 | 110.00 | 111.00 | 2.20 | 2.70 | 3.20 | 0.942 | 3.40 | 3.90 | 1.158 |
© Copyright 2025 Teraflow Pips. All rights reserved. Powered By Idea Folks